RUST REMOVER GEL 250ML – RUST REMOVER, RUST REMOVER GEL
RUST REMOVER GEL 250ml – rust remover, rust remover gel
A strong mixture of fast-acting chemical structures, based on modified orthophosphoric acid, dissolving metal oxides. Combined with surface tension molecules, it penetrates deep into corroded surfaces. It is also used to remove dirt from cement mortars, rust stains, etc. The gel structure allows the product to be used on vertical surfaces.
| Product information
properties
A strong mixture of fast-acting chemical structures, based on modified orthophosphoric acid, dissolving metal oxides. Combined with surface tension molecules, it penetrates deep into corroded surfaces. It is also used to remove dirt from cement mortars, rust stains, etc. The gel structure allows the product to be used on vertical surfaces.
Technical data
| Appearance | liquid |
| Color | Red |
| Smell | characteristic |
| pH | >2.0 |
| Boiling point, ºC | around 90 |
| Freezing point, ºC | approx. 0 |
| Flash-point | incombustible |
| Vapor pressure at 20°C | no data |
| Density at 20 °C g/cm3 | 1.1 – 1.25 |
| Solubility in water | completely soluble |
Directions for use
The surface should be cleaned of loose rust and dirt. Apply the preparation with a brush or roller, leave until the rust dissolves, then wash thoroughly with water and dry. For slightly rusted surfaces, leave the preparation on the surface for 5-15 minutes, if there are already pits on the surface – rust removal may take several hours. If, after rinsing with water, the surface needs to be reapplied, it can be applied without drying it.
The product has an aggressive effect on some galvanic surfaces (strongly on galvanized surfaces). In the case of cleaning such items, it is necessary to act briefly and locally.
Before using the preparation, tests should be carried out on a small area each time.
