The TRAFFIC gate is a perfect solution for areas where the speed of operation and the number of opening and closing cycles are crucial, in particular in logistics centers, housing estates, guarded car parks, and other areas of public and industrial activity.
The gate combines the advantages of a double-leaf gate and a barrier, enabling permanent access control or traffic control.
The TRAFFIC folding gate is available in a double-leaf and a single-leaf version.
Gate infill:
The gate is available with both the Totmann and the Automatik modes, depending on the required operation method. The gate was tested to the PN EN 13241-1 standard.
The gate is supported on posts using a special system of hinges and linkage. There is no need to mount an auxiliary track in the ground or to the lintel.
Features a reliable and quick automatic operating unit.
The selected materials and design solutions enable heavy-duty operation of the gate.
The combination of zinc and varnish coatings in the DUPLEX system substantially contributes to extending the life of WIŚNIOWSKI fences. Regardless of the weather, you can always be sure that WIŚNIOWSKI fences will keep their appealing look.
The gates are available in a hot-dip galvanized or a galvanized and polyester coated version. The gates are available in the following colours as standard:
RAL 5010, RAL 6005, RAL 7016, RAL 7030, RAL 9016, RAL 9005/MAT.
The product is covered by a 5-year corrosion protection guarantee.
Structure made of welded 60x60mm sections. The leafs constitute a folding system and are connected with nodes seated on rolling bearings. Fastening elements and linkage joints are made of stainless steel. The leafs are fitted with stainless lead covers. A catcher with a roller is mounted in the middle of the gate, and for gates over 4,500mm, a magnetic armature is fitted as standard. The gate is available in a double-leaf and a single-leaf (left or right) version.
Each gate is supplied with load-bearing posts made of a 160x160mm section. The gate posts are fitted with base plates reinforced with ribs. The base plates are pre-drilled for M20 anchor installation.
The TRAFFIC high-speed gates are paired with the CAME Ferni F1024 automatic operating units. The drives are controlled by the CAME unit installed in a box with an IP65 rating.
The gate opening speed is about 0.6 m/s . The gate is intended for up to 250 operating cycles per day.
We guarantee efficient operation in temperatures from -20 to +55 °C
The automatic operating units are installed in the top section of the load-bearing posts. Torque is transferred to the leafs through a folding arm system and a linkage system.
The Traffic gate is available in two specifications depending on the required security system accessories
Totmann (key switch integrated with the emergency stop, warning light, control unit, two actuators) or Automatik (key switch integrated with the emergency stop, warning light, photocell kit, two safety edges on the face edges of the leafs, two two-channel transmitters, radio, control unit, and two actuators)
help@factorymarket.online
Parnu Savi 3/2 80040
Design & Developed by Techsaga Corporations.